SienSen 10Pcs/lot 315MHZ 5V Receiver Module with Decoder and Superheterodyne 4 Output Modules Support Chip Type 1527/2262

Our receiving module needs to be used with the transmitting module,if you need transmitter,please check here:

1.Product parameters

Operating voltage: DC2.5V-5V

Operating current: 3mA

Sensitivity: -108DBM

Rate: MAX 10 KB/S

Support encoding chip model: EV1527, PT2262, other custom

Working mode: jog, self-locking, interlocking

Output: 4 CMOS level signals, corresponding to the remote controller "ABCD" 4 buttons

Remote controller can be stored: 24

2.Instructions
     
     Clear code:
     
     Press 8 to learn the code button, the LED goes out. The LED flashes 8 times and clears OK.
     (If you need to change the working mode of the same remote controller, please clear the code before you learn)
     
     Learn to code:
     
     Step 1: Press the learning button of the decoding module according to the required number of times to select the working mode, and the LED of the decoding module lights up.
       Jog Mode: Press the Decode Module Learning button once.
        Self-locking mode: press the module learning button 2 times.
        Interlock mode: Press 3 times to decode the module learning button.
       
        2-way jogging + 2-way self-locking: Press the 4-times decoding module learning button.
        2-way self-locking + 2-way interlocking: Press the 5-times decoding module learning button.
        2-way jog + 2-way interlock: Press 6 times to decode module learning keys.
        2-way interlock + 2-way interlock: press the 7-times module learning button. 
     
     Step 2: Press any button on the remote control. After the decoding module receives the signal, the LED of the decoding module blinks three times and then goes off. The code is successful.
     (If there is no remote control signal after entering the learning code mode, the learning code mode will be automatically exited after 10 seconds.)
 
Work mode introduction:
 
      2.1 Jog: press the remote control, the decoding module instantaneous output once the level signal is the jog mode.

Setting method:
      Step 1: Press the learning button of the decoding module once, and the LED of the decoding module lights up.
      Step 2: Press any button on the remote control. After the decoding module receives the signal, the LED of the decoding module blinks three times and then goes off. The setting is successful.
 
 
       2. 2Self-locking: Press the remote controller, the decoding module continuously outputs the level signal, and then press the remote controller, and the decoding module stops outputting the signal, which is the self-locking mode.

Setting method:
      Step 1: Press the learning button of the decoding module twice, and the LED of the decoding module lights up.
      Step 2: Press any button on the remote control. After the decoding module receives the signal, the LED of the decoding module blinks three times and then goes off. The setting is successful.
     
       2.3 Interlock: press the remote control, the decoding module continues to output the level signal, and then press the remote control, the decoding module replaces the output channel is the interlock mode. (For example: Press the remote controller A key, decode the output signal of the module D0 pin, press the B button, the decoding module D0 pin stops outputting the signal, and becomes the D1 pin output signal.)
     
Setting method:
      Step 1: Press the learning button of the decoding module three times and the LED of the decoding module lights up.
      Step 2: Press any button on the remote control. After the decoding module receives the signal, the LED of the decoding module blinks three times and then goes off. The setting is successful.

3. Pin Description

GND: Ground pin

+V: Power input pin

D0: Output pin 1

D1: Output pin 2

D2: Output pin 3

D3: Output pin 4

VT: LED lamp external pin

Packing includes:

10Pcs RX480E-3 Receive Module
 

In order to ensure that you will receive your order without or less tax, we will declare it as "GIFT" with a lower value, The value doesn't reflect the total price you paid or the market value and may not apply to countries with different tariff rules. 

If you won't like to lower value declaration, please contact us or leaving messages in the order. 

Any import charges or fees are the buyer's responsibility. 

Reminder:All photoes are for reference only, Specifications are subject to the phisycal product. 

If you want to purchase more, please contact us. 

Please contact us before leaving any negative or neutral feedback or opening disputes, we will work with you to solve any problems. 

All emails will be replyed within 1 day, If you don't receive our reply, please kindly re-sent your email, we will reply ASAP.