Rstar BC200 Plasma Cutter Tig Stick Welder 3 in 1 Combo Welding Machine, 50Amp Plasma Cutter, 200AMP TIG/ Stick Welder

2018 New BC200 3in1 DC TIG MMA PLASMA CUTTER WELDING MACHINES

Product Description:

As one of the largest manufacturers of plasma cutting, tig/stick, arc (MMA) welding equipment in the world, Rstar is proud to offer an extensive selection of industrial plasma cutting and tig/stick welding machine, BC200 Rstar  BC200 is designed and constructed to withstand extensive use in rugged industrial and construction environments. It is perfect for any home project too.

     Rstar BC200 is a THREE-IN-ONE Digital Inverter DC Plasma Cutter (50A) / DC Tig Welder  (200A) / DC Stick (MMA) welder (180A). 

You would have to purchase 3 separate machines to do what this ONE machine can do,welding Stainless steel,Carbon steel,copper,Using this portable plasma cutter is cheaper than Oxyacetylene after just a few cuts. Less cleaning, less maintenance, less noxious gases, less fire hazard, simply less overall work and abetter, cleaner cut. The torch trigger can be moved for a custom fit. It can be used in finger or thumb positions. Torch head is low profile for tight spaces. High Frequency DC Plasma cuts thicker materials than standard DC plasma cutters. High Frequency Plasma cuts faster with less distortion in the work piece.

It's packed with full features like the separate machines. The Tig welds from this BC200
 are clean and strong. This Tig welder is easier to use than any other Tig welder on the planet! Just flip a switch, set your amperage and weld...It's that simple. This machine will weld Steel, Stainless Steel, Moly, Ferrous,

An ARC welder is a necessity in any industrial shop or home workshop. There are welding jobs that simply require ARC or SMAW (Shielded Metal Arc Welding). Stick welding is cheap and effective. Fill large gaps, holes, weld cast iron and weld extra thick steel with stick. With Arc welding, no shielding gas is required. In many ways stick arc welding is like MIG except there is no wire feed, you have to do that manually.

Machine Features

• Three-in-one 50A plasma cutter, 200A tig welder and 180A stick welder
•  Voltage- <220VAC -50Hz/60Hz)
• High quality FUJI Mosfets (total 12 pieces) from Japan
• Brand new yet double function tested and performance tuned prior to shipping
• PASAT cooling system from German
• 3 Year Warranty on Parts and accessories
• Input Voltage: Single-phase 220 v
• Input Power Frequency: 50 hz / 60 hz (Better performance under 60 hz)
• Insulation Grade: B
• Housing Protection Grade: IP21
• Size: 21'' L  x 16'' W x 11'' H 
• Weight: 39 lbs (44 lbs with box)
• Certification: CE, CCC, CSA and ISO-9001 certification
• Power factor: 0.93
• Power efficiency: 85%

         Plasma Cutting

• Duty Cycle: 60% at 50 amps and 100% at 35 amps
• Rated Input Current: 27 amps
• 3" Per minute @ 1" Steel (Severance Cut)
• 7" Per minute @ 3/4" Thick Steel
• 17" Per minute @ 1/2" Thick Steel
• Air pressure required: 60~70 psi @ 3.6 cfm

        Tig Welding

• Output Current: 15-200 Amps
• Power Usage 17 Amps @ 220VAC
• No Load Voltage: 62V
• Can Weld: Steel, Stainless, Molly, Ferrous
• Duty Cycle:  60% @ 200 Amps 100% @ 105 Amps
• High Frequency Start / HF Welding
• Working Voltage: 16.9V
• Gas Flow: 2-5L/min (using Argon supply)

        Arc/Stick/MMA Welding

• Output Current: 15-180 Amps
• Power Usage 23 Amps @ 220VAC
• No Load Voltage: 62V
• Can Weld: Steel, Stainless, Moly, Ferrous
• Duty Cycle:  60% @ 180 Amps 100% @ 95 Amps
• High Frequency Start / HF Welding
• Working Voltage: 25 Volts
• Stick Aluminum Feature (Patent Pending). 

Accessories

• Plasma cutting torch. 
• Tig Welding Torch with 11 ft hose (with long and short caps)
• Ground cable (9 ft) with clamp.
• Initial cutting consumable (tip, electrode, o-ring and shield cup installed on the cutting torch).
• Air filter and regulator with accessories and brackets.
• Air hose (longer one)
• Stick (ARC) Holder 
• User Manual
• You will need to provide a 60~70 psi air supply