LASER TREE 80W High Power Laser Module with Air Assist Metal Nozzle TTL Laser Head for CNC Engraving Cutting Machine DIY Tools

Product Description

LT-80W-AA has 2 forms:

Forms 1:

Air assist system: When performing laser cutting jobs, an air assist system blows air through the air nozzle, enhancing the cutting performance and reducing the burn marks. You can remove the air assist nozzle when you are doing non-cutter jobs.This laser kit only comes with an air assist nozzle, to make full use of the air assist feature, you may need to prepare an air assist pump and air tube yourself.

Recommended Air Tube:inner diameterΦ2.5-3mm

Recommended air pump:150kPa

Forms 2:

Laser protective cover: It can effectively filter blue light and can work without wearing goggles. We recommend using this form for engraving

[Main performance]

a.Directly engrave mirror stainless steel: no need painting black;

b. Super fast engraving speed: 304 stainless steel, up to 30mm/s with 45mm focus length;

c. Remarkable cutting ability: cutting through 8-10mm thickness plywood by one pass at speed of 1.5mm/s     with 45mm foucs length.

[Original diode] Original diode, high quality,20,000 hours lifetime!

[Easy to use] Wavelength: 450nm, Input: DC 12V 3.2A ,Support 5V PWM modulation, Input port: XH2.54-3P socket ,control line installation method: pluggable.Suitable for DIY engraving machine.

[Applicable materials] Ceramics,Bone,MDF,Coated glass,Black acrylic,Plywood,Brushed stainless steel,Stone,Bamboo,Leather,Rubber,Alumina,Solid wood, etc.

[Precautions] Unable to engrave: blue/purple/white/transparent material, aluminum without oxide layer.

Feature:

Blue laser module---a professional laser head with high speed and high stability. Bright blue light, easy to locate when carving.

Fixed focus laser head, suitable for three-axis engraving machine, easy to install.

Easy to assemble---small, compact, convenient and easy to install.

Effect Output Power: 80W(10W optical power)

Wavelenght: 450nm

Electric Power:12V3.2A(3A-3.5A), 24V 1.7A(1.5A-2A)

Engraving Material:

Plywood, Pine board,Black acrylic, Leather,MDF,Ceramics,Bone,Coated glass,Mirror stainless steel,Brushed stainlesssteel, Stone,Bamboo,Rubber,Alumina,Solid wood

Cutting Material:

8-10mm bass plywood, 4-5mm black acrylic, 4-5mm MDF, 8-10mm pine board, 5-6mm leather

Reference settings for cutting

If you want to cut 2mm or 3mm plywood, the focus fixing plate should be 5mm.

If you want to cut 5mm or 4mm plywood, the focus fixing plate should be 4mm.

If you want to cut 6mm plywood, the focus fixing plate should be 3mm.

If you want to cut 8mm plywood, the focus fixing plate should be 3mm.

Cutting Through 8mm Plywood By One PassScorched Edges(Without Air Nozzle)

Clean-Cut Edges(With Air Nozzle)Dual-LDs with beam compressed technology

One laser module has two built-in laser diodes.The optical power of each diode is 5W.

With beam combination technology, our laser module is double powerful and the beam quality is as good as a single diode.

OTHER LASER MODULE:

Thicker beam and shorter effective energy range

Lower energy density beam

LASER TREE LASER MODULE:

Thinner beam and a longer effective energy range

Higher energy density beam, stronger cutting abilityProduct Size

Cutting Speed Reference

Note:

ln the process of replacing the air nozzle,if the operation is not standardized,the lens of the module will be polluted(fingerprints/dust are attached on thelens), which will greatly weaken theoutput power of the module and evendamage the lens.

Correct method: wipe the lenswith a clean alcohol swab untilthe lens is clean.Reference settings for engraving

If you want to engrave,the focus fixing plate should be 7mm.

Minimum 0.08mm Ultra-thin BeamProduct sizeReplaceable Protective Window Glass

LT-80W-AA Packing list:（550g）

1*Laser module

1*Eye protection design

1*Spare protective window glass

1*3 Pin input cable

2* L Wrench

1*Air NozzleLT-80W-AA Kit A Packing list:（650g）

1*Laser module

1*Eye protection design

1*Spare protective window glass

1*3 Pin input cable

2* L Wrench

1*Air Nozzle

3*Focus fixing plate

FAQ:

1.Is the laser head compatible with the machine?

Please check whether the laser module is compatible with your engraving

A. Check the voltage parameter of your engraving machine.(12V or 24V. Then please select the module corresponding to the voltage parameter)

B. Check the pin definition of the main board on your engraving machine.(XH-2.54 3PIN connector -PWM, GND, VCC +12V)

■“A"&"B"are both compatible.
Connect the laser module to the main board of your engraving machine directly.

■Control board pin definition is not matched.
Situation

1>: The definition of connector on the engraving machine main board is not with the pin definition on the main board.
Please rearrange the wire sequence of the cable to make each wire is well matched
Situation

2.>: Please use P-DA-01 if the main board of your engraving machine is not 3pin, such as 2pin or 4pin（Please select LT-80W-AA-KITB)

2.Why does the title say 80W, but the actual power is 10W?

For a laser head, beam size is a very important parameter which is more important than power when you make cutting and engraving
In order to win the market, we must use the best diode to make our module, Dual-LDs with beam compressed technology
Optical power 10W, the key perfermance of this laser head is its small beam size, please focus on the effect of the laser head, not only power, so you can understand the 80W as it’s effect laser power

3.Are CNC machines compatible with laser heads?

CNC MACH3: Adapter Board P-DA-01 is required;

CNC Shield V3: Adapter Board P-DA-01 is required;

CNC 3018 Pro: Cable sequence change is required.

If you have other models you are not sure about compatibility, you can always contact us