SALE

ID: 88125

High Quality Brand New LCR-T4 ESR Meter Transistor Tester Diode Triode Capacitance SCR Inductance

4.7 (478 votes) | 3724 orders

Price: ~~US $36.23 - 57.00 / piece~~

Discount Price:

US $ 20.09 - 30.78 / piece

-45%

Ships From

Color

Quantity

Buy Now

Add to Cart

Package Included:

The package in the picture you click to pay is the product you will receive

Notice:

Before measuring capacitance , the capacitor must be discharged , otherwise very likely damage the meter .The screen is not fixed

LCR-T4 Detailed Introduction:

Features :

• 128*64 big Backlight LCD display,only 2mA when stand by.

• Using 9V battery (Not included)
• Inductors, capacitors , diodes, dual diode , mos, transistor, SCR , the regulator, LED tube , ESR,
• Resistance,Adjustable potentiometer
• Resistance : 0.1 ohm resolution, maximum 50M ohm
• Capacitor : 25pf -100,000 uf

• Inductors : 0.01mh-20H

• Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET,

diode (including double diode), thyristor, transistor, resistor and capacitor and other components

• Automatic test the pin of a component, and display on the LCD

• Can detect the transistor, MOSFET protection diode amplification coefficient

and the base to determine the emitter transistor forward biased voltage

• Measure the gate and gate capacitance of the MOSFET threshold voltage
• Use 12864 liquid crystal display with green backlight
Specifications: For you reference
1: One -button operation, automatic shutdown .
2: Only 20nA shutdown current.

3: Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET,

JFET , diodes , two diodes, thyristors small power unidirectional and bidirectional thyristor.

4: Automatic identification components pin arrangement .
5: Measuring bipolar transistor current amplification factor and base - emitter threshold voltage.
6: Via the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors.
7: Can detect bipolar transistors and MOS transistors protection diodes.
8: Measuring the gate MOS FET threshold voltage and the gate capacitance.

9: Can simultaneously measure two resistors and resistor symbol is displayed.

Displayed on the right with a decimal value of 4 .

Resistance symbol on both sides shows the pin number.

So you can measure the potentiometer.

If the potentiometer wiper is not transferred to an extreme position ,

we can distinguish the middle and both ends of the pin.

10: Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .
11: Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF.

12: 2uF more capacitors can simultaneously measure the equivalent series resistance ESR values.

The two can be displayed with a decimal value , resolution 0.01 ohms.

13: Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.
14: LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.
15: Eeverse breakdown voltage is less than 4.5V Zener diode can be identified.

16: Can measure a single diode reverse capacitance.

If the bipolar transistor connected to the base and collector or emitter of a pin ,

it can measure the collector or emitter junction reverse capacitance .

18: can be obtained with a single measurement rectifier bridge connection.

LCR-TC And LCR-T7 Detailed Introduction:

Features :

• It can be widely used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc.

• It can also be used to detect infrared wave shapes.

• It can also detect Zener diode and has the function of self-calibration.

• After detection, align the infrared remote controller with the "IR" light, press the button in the remote controller, if the detector successfully decode it, it will display the data code and infrared wave form.

• One button operation, Automatically detect and shutdown, and you can press the multi-function button to close the detector too.

• Put the pins of component in corresponding area, then dial the small handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly.

• Not like the usual black and white screen, this detector will show results in color.

Specificaties:

1: Display: 1.8Inch TFT display

2: Resolution: 160x128

3: Diode Range: <4.5V

4: Zener Diode: Transistor Detect Area: 0.01-4.5V

5: Zener Diode Detect Area: 0.01-30V

6: Triac Range: IGT < 6mA

7: Capacitance: 25pF-100mF

8: Resistance:0.01-50MΩ

9: Inductance:0.01mH-20H

10: Battery: 0.1-4.5V

11: Power Mode: Rechargeable lithium battery(INCLUDED)

12: Item Size: 8.8x8x2.8cm / 3.47x3.15 x 1.10in

13: Item Weight: 111.5g / 3.94oz

14: Size: 14.5x12x2.7cm / 5.71x4.73 x 1.06in

15: Weight: 114g / 4.02oz

LCR GM328 Detailed Introduction:

Features:

• Digital LCD display for easy readings, can display measured data and graphics.

• Rotary switch control, a key measurement for convenient use.

• Main chip is the DIP, easy for electronic enthusiasts to DIY or update the main chip.

• Use 9V battery(not included), can also use DC power(DC 6.8-12V).

• Automatic shutdown, shutdown current is only about 20nA.

• Automatically detects NPN and PNP transistors, FET, diodes, dual diode, thyristor, SCR, automatic identification of the transistor pinout.

• Test NPN and PNP transistor common-emitter current amplification factor, the base-emitter threshold voltage, off the collector - emitter leakage current.

• Support 2 resistors measurement, show its positive and negative, on-state voltage.

• Resistance measurement maximum resolution 0.01Ω, can be measured up to 50MΩ.

• Automatically test the pins of a component and show on the display.

• Measure FET gate threshold voltage and gate capacitance.

• For the following 2100Ω resistor while measuring its inductance measuring range from 0.01mH - 20H.

• Can be used as signal generator and frequency meter: frequency range from 1Hz-2MHz and can generate 1%-99% PWM(pulse width modulation) signals.

Specifications:

1: Display: 160*128 LCD

2: Power Supply: 1 * 9V Battery(not included); DC 6.8-12V

3: Current: Approx. 30mA

4: Resistance Measurement: Max. 50MΩ

5: Resistance Resolution: 0.01Ω

6: Capacitance Measurement: 25pF~100mF

7: Capacitance Resolution: 1pF

8: DC Voltage Measurement: Up to 50V

9: Screen Size: 3.7 * 3cm / 1.45 * 1.18in

10: PCB Size: 7.8 * 6.2cm / 3.1 * 2.44in

11: Weight: 66g / 2.3oz

LCR M328 Detailed Introduction:

Features:

• 128 x 160 TFT color display

• Powered by 9V battery (battery not included)

• New boot voltage detection

• Automatically test the pins of a component and display on the LCD

• Measure the gate threshold voltage and gate capacitance of the MOSFET

• Measure bipolar transistor current amplification factor and base-emitter threshold voltage

• One-button operation, automatic shutdown to avoid unnecessary battery drainage

• Short detection time: only 1.7 seconds (it is normal to take 1 minute for bulk capacitor detection)

Specifications

1: Display: 128 x 160 TFT color display

2: Normal testing speed: 1.7 seconds

3: Shutdown current: 20nA

4: Resistor test range: 0.5 ohms - 50M ohms

5: Inductor test range: 0.01mH - 20H

6: Capacitor test range: 25pF - 100000uF

7: Color: Black

8: Size: 135 x 70 x 25 mm (5.31 x 2.76 x 0.98 in)

9: Weight: 99g (3.5 oz)

Is Smart Device: No
DC Current: 9V
AC Current: no
DC Voltage: 1A
AC Voltage: no
Measuring Capacitance Range: as the description
Measuring Resistance Range: as the description
Model Number: LCR-T4
Dimensions: as the description
Operating Temperature: 0 - 40 ℃
Measuring Inductance Range: as the description
Display Type: Digital display
DIY Supplies: ELECTRICAL
Brand Name: FNIRSI
Origin: Mainland China
Certification: CE

SHIPPING AND DELIVERY

We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.

How do you ship packages?

Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.

Do you ship worldwide?

Yes. We provide free shipping to over 200 countries around the world. However, there are some location we are unable to ship to. If you happen to be located in one of those countries we will contact you.

What about customs?

We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.

How long does shipping take?

Shipping time varies by location. These are our estimates:

Location	*Estimated Shipping Time
United States	10-30 Business days
Canada, Europe	10-30 Business days
Australia, New Zealand	10-30 Business days
Central & South America	15-30 Business days

*This doesn’t include our 2-5 day processing time.

Do you provide tracking information?

Yes, you will receive an email once your order ships that contains your tracking information.

My tracking says “no information available at the moment”.

For some shipping companies, it takes 2-5 business days for the tracking information to update on the system.

Will my items be sent in one package?

For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.

If you have any other questions, please contact us and we will do our best to help you out.

REFUNDS & RETURNS POLICY

Order cancellation

All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.

Refunds

Your satisfaction is our #1 priority. Therefore, if you’d like a refund you can request one no matter the reason.

If you did not receive the product within the guaranteed time(45 days not including 2-5 day processing) you can request a refund or a reshipment.

If you received the wrong item you can request a refund or a reshipment.

If you do not want the product you’ve receive you may request a refund but you must return the item at your expense and the item must be unused.

Your order did not arrive due to factors within your control (i.e. providing the wrong shipping address)
Your order did not arrive due to exceptional circumstances outside the control of HOGAKI.COM - Home, Garden & Kitchen shop (i.e. not cleared by customs, delayed by a natural disaster).
Other exceptional circumstances outside the control of hogaki.com

*You can submit refund requests within 15 days after the guaranteed period for delivery (45 days) has expired. You can do it by sending a message on Contact Us page

If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.

Exchanges

If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.

Please do not send your purchase back to us unless we authorise you to do so.

LARGE ORDER DEALS

Thank you for your interest doing business with us!

If you would like to get a discounted price for your large purchase orders, fill in the required blanks along with your email address, the product Item ID # and/or the link of the item that you want to order, item quantity (minimum of 30 pieces), shipping country and payment method is required. We will contact you with a discounted price as soon as we receive your inquiry.

Your Name:

Your Email Address:

Item ID or Item Link:

Quantity:

Shipping Country