T12 Soldering Station LED Digital Temp Adjust Repair Soldering Iron Equipment Portable Home Electronics Repair Tool Set

T12 Soldering Station Infrared Soldering Station Portable Bga Rework Station With Soldering Tips Welding Tools

Auto standby

when it doesn't work for a long time. you can set idle time (0-30) minutes, then the soldering station will enter the standby mode. the handle keep work during the standby mode. pressing the encoder switch, it will enter the sleep mode.

Auto sleep

power off time-0-30minute.
entering the sleep mode, the soldering iron stops heating.

Aluminum alloy design

portable metal soldering station, compact design, light weight, has a long service life.

Adjustable temperature soldering tation

the adjust range is 200-450 ℃， the best working temperature is 330-380℃

Quick heat up function

quick heat up time < 8 seconds,
when the handle isn't move, the handle will automatically sleep.

Product parameters

Model no: T12 digital soldering station
Input voltage: AC100-240V
Output votage: DC 12-24V
power:24v 4A/6A
Soldering iron temperature range:200-450℃
The melting time:6-8s
Auto sleep:yes
Auto standby:yes

Large-screen digital display

Soldering iron handle with soldering iron tips

1:110cm pure silicone handle line professional electrical level soft and comfortable
2:split design easy to replace

power switch prompt light

light will show when the switch is turn on, safe tips,

Fuse: use only A 250V fuse

silicone base installation:
the silicone base is anti- slip, anti-resisant, durable, and easy to operate.

package

soldering station *1pc
soldering tips *2pc
soldering iron handle *1pc
adoptor cable *1pc
silicone base installation 1pc
soldering stand *1pc
soldering sponge *1pc

Basic operation

press and hold the encoder button and turn it on again to enter the paramter set mode. there are 9 menus for setting p00,p01,p02,p03,p04,p05,p06,p07,p08,p09,p10,p11,p12.

P00

P00-restore default prameters(0 or 1,default value 0,0 is not restored, 1 is recovery)

P01

p01-op amp gain(200-350 times, step 1,default value 270,)

P02

p02-op amp offset voltage(0-250mv, step 2, default value 100,which means that the soldering iron head maintains the output voltage inherent to the room temperature op amp, if you do not measure, please keep the default value p03-increase the ttemperature, adjust the temperature ,30-50 ℃ )

P03

if you do not measure, please keep the default value p03-increase the ttemperature, adjust the temperature ,30-50 ℃ )

P04

p04-temperature adjustment step(0,1,2,5,10 degrees optional, 0 can lock the soldering iron temperature)

P05

p05-sleep time(0-60 minutes,step 1 is 0, the sleep function is disabled)

P06

p06-shutdown time(0-180 minutes, step 1 at 0-30,step 10at 30-180, disable function when 0)

P07

p07-temperature correction(-30+ 30 degrees,step 1)(because the ntc resistor is in the chassis, the soldering station will cause the detacted ntc temperature to be higher than the room temperature, resulting in high compensation of the cold junction of the thermocouple, and the temperature of the soldering iron is not accureate. it can be corrected with this parameter. fro example ,if the detected soldering iron temperature is 20 degrees higher than the actual value,set this paramter to 20)

P08

po8-wake-up mode (0,1,0 means that the encoder can be rotated in the shutdown mdoe and the handle can be awakened by the vibration handle. fro 1, only the rotary encoder can wake up )

P09

p09-temperatue plus strength(llight click on the encoder to error to enter the temperature for the shdden need to weld the solder joint)

P-10

p-10 temperature enhancement time (enhanced time...)

P-11

p-11 buzzer switch(o means off 1 means on)

NOTE:

Iron tip do not work continuously high temperature, high temperature work is easy to damage the tip! Ordinary solder melting point is 183°C, lead-free solder melting point is 227°C, usually the welding temperature is 300-380°C, 380°C is the temperature of the dividing line, higher than 380°C, iron head oxidation and loss is extremely fast, seriously affect the heating core life The Higher than 380°C temperature display will be beating, the higher the temperature, the greater the beating!Recommended in the 300-380°C for welding work, most of the work can be carried out, the temperature beating is normal, does not affect the use! The soldering iron used in this soldering station is a brand new soldering iron tip. Due to the unstable resistance of the new soldering iron tip, the temperature will jump or ERROR, which is normal. After several times of use, the stability will gradually stabilize. If you mind, please do not buy.