Original EFR F6 Co2 Laser Tube for 130w-150w Laser Cutting Machine

Packing List: 

<1> F6 Co2 laser tube*1pc; 

Product intruduction

1. Stability: the discharge glass tube body is imported from Germany. The laser beam mode is up to TEM00. The power is table. It is competitive for industrial application.

2. Power: The power is 30% higher than other laser tube with same length.

3. Long Life: the catalyst coating on discharge tube with unique electrode processing makes the laser out put is more stable, avoid power weaken during long time working.

Quality Promise

Working Life: up to 6000 Hours

Warranty: 300 Days

Internaitonal Warranty Service: If F6 130w laser tube has any quality problem during the 300days warrnaty period,i will send you a new free one for replacement after the tube factory confirmed the quality problem.

1. Within 150 days from exit works date on the label, we replace free of charge if the power is less than 80% of rated power while the users operate according to our manual. The replaced laser tube will have same warranty as new ones. The single transportation freight will be afforded by buyer. When the laser tube structure is damaged or changed, we will not be responsible.
2. Form 151st days to the 300th days from exit works date on the label, we repair or replace free of charge if the power is less than 75% of rated power while the users operate according to our manual. The replaced or repaired laser tube will have same warranty as the one which the buyer purchased first time from us. The single transportation freight will be afforded by buyer. When the laser tube structure is damaged or changed, we will not be responsibl

Specification for F series of laser tube 

130w F6 laser tube Parameters Lists

Photos

F6 laser tube more Phtos;

How to connect

1.    Installation Requirement

Make sure to follow the operation instruction of model F6 as shown in the illustration. T150/Es150/Z150 laser power supply all can work F6 laser tube. The positive pole of laser tube is in high voltage (the ignition voltage is 19kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.

2.    Operation conditions

Water cooling: using purified water; 2 to 5 liter/minute; water temperature: 10℃-40℃.

The operating environment: temperature 2-40℃; Humidity 10-60%.

The working current: test current is 30mA. Maximum working current is 30mA. The running current must be kept below 28mA. The life span can reach 6,000 hours if the current is kept below 26mA. The ammeter must be connected to the negative electrode of laser tube.

When it is working under over-high current for long term, the negative pole will appear brown yelloe and the life span will be shortened rapidly.

To protect dust from going into the insulation sheath, please wrap it with plastic film.

3.    Working Performance

Cutting function.

Engraving function: Very good. When the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving.

4.    Key Notes

Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror:

1) When the mirror is polluted, do not turn on the laser.

2) Blow the mirror surface sideways with an air blower.

3) Spray the pure alcohol on the mirror surface with sprayer.

4) Turn on the laser after the alcohol gets fully volatilized.

5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted.

Attention: it is forbidden to clean the mirror with acetone.

The screws in the front and back ends of the laser tube are not allowed to be moved, otherwise the output power will be declined, even the tube will be scrapped.

Put the acryl 300mm far away from output mirror, when testing its laser spot.

5.    Safety

The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks.

6.    Storage and Transportation Requirement

Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40℃, and the requested humidity is 10-60%. Pack the laser as in the original way.

Important notes: it is requested to use adhesive tape to cement the sponge together with laser tube to prevent the tube from vertically sliding during transportation. The sponge in the side of output mirror must be 70 mm beyond it, and the sponge in the side of reflecting mirror must be 50 mm wider.

    Tubes operated in wrong way are not guaranteed by Manufacturer.

Matched power supply

Es150 Laser Power Supply Specification

Laser Power:130w-180w

Brand Model: Hongyuan Es150

AC Input: AC90V-AC250V  50Hz/60Hz

DC Output: DC45KV 38mA (max)

Net Weight: 3.2kgs

Size: L*W*H=340*145*110mm

Our package

F6 Laser Tube packing photo

DHL has the best service for shipping fragile products,I will send you a new one for relacement if the laser tube broken during the shipping.

• Customs Duties: 

1. All the products shipping from China might cause tariffs. Please know well about your country's import laws. All the products Cloudray selling default FOB trading terms, the buyers will take his responsibility on all kinds of tax in their country. If you have special requests about declaration, please leave messages to us when you make an order. 
2. Shipping from local country (Germany/USA/Russia) has no import tariffs required.

• All packages to Brazil need CPF number by DHL/UPS/Fedex/EMS.
• All packages to Argentina need CUIT number by DHL/UPS/Fedex/EMS.
• All packages by Chile need RUT number by DHL/UPS/Fedex/EMS.
• All packages to Russia need the Full Name(First name + Mid name + Last name).
•  

Here is a list of the buyers in the shopping or after-sales service problems

Maybe some of your doubts will find the answer here

Q: How can track my parcel?

A: You can track your parcel on DHL website www.dhl.com.

Q: Can you Accept drop shipping?

A: We could send the goods to your customers directly and won’t leave infroamtion about us if you’d like to.

Q: Is there any discount for bulky order?

A: Yes,we can provide wholesales price if you need more. Please contact me by Skype or Email me,we can talk the details.

Q: Is there any customs Tax?

1. usually we will declare total value USD328 on the shipping invoice.Because DHL compensate the broken goods according to the value on the shipping invoice.

2. If you have any special requirements on the Shipping Value, we can do according to your requirements,but you should undertake the loss if the tube broken during the shipping.

3. due to different policies in different countries,there might be Customs tax that should be paid by the buyer.