NEJE 3/2S plus A40640 Laser Engraving Machine GD32 255 x 440 mm Wood Router Laser Cutter - App Control LaserGRBL Lightburn

NEJE Master 2S Plus A40640 Laser Engraving Machine

Feature:

-【420 x 255 mm】Just fit on a desktop with a width of 600mm, and the left side of the machine is not limited by the size of the material. It is suitable for processing large area materials. Under the protection of the MEMS vibration protection sensor, the engraving and cutting processes can be completed at the same time. The X-axis motion module is only 120g and is driven by a 40mm thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure, 3400 x 5600 pixels, engraving accuracy: 0.075 mm dot pitch, 339 dots/inch. The whole machine function test requires only 4 screws to complete the installation.

-【Advanced laser module】 The laser beam is formed by combining two high-power laser diodes and adopts FAC technology. Support NEJE advanced laser module, Built-in fast intelligent drive, temperature feedback can be timely, and intelligently adjust fan heat dissipation. Safe and quiet to use.

-【More materials, clearer】 Wood, MDF, leather, paper, cotton, etc. are all supported. 8mm plywood only needs air-assisted cutting once (A40640), and the cutting is very clean. Can directly engrave stainless steel, glass, transparent acrylic and so on.

-【Portable professional control software]】32-bit control system, the fastest speed can reach 200,000mm/min, supports LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS), you can change it by taking photos with your mobile phone or selecting images from the album To complete the work quickly, NEJE provides free software upgrade services.

-【Perfect after-sales service]】The whole machine is guaranteed for free for 2 years (laser module: 2 years and 20,000 hours warranty), and vulnerable parts are shipped worldwide within 24 hours.

Specification:

• Machine Module：NEJE Master 2S Plus A40640

• Working Area: 255*420mm

• Frame Size:550*470*140mm

• Motherboard: 32-Bit

• Control Mode: PWM,TTL

• Firmware: GRBL 1.1F

• Precision: 0.075MM

• Pixel Accuracy: Adjustable

• Focal Length: 30MM

• Pixel:3400*5600 px

• Support file format:BMP / JPG / JPEG / PNG / DXF / IBM / NC etc

• Input:12V3A-5A

• Available Materials of Engraving: Wood, Paperboard, Acrylic, Metal

• Available Materials of Cutting: Kraft Paper, Paper Board, etc.

NEJE A40640 Laser Module :

• Radiator Size: 40 x 50 x 60 mm

• Weight: 204g

• Speed of the Fan: 10600RPM(Double ball bearing)

• Interface: PH2.0 4Pin

• Drive Design: Built-in

• Input: 12V 4A +

• Optical Power: 10W +

• Wavelength: 450nm

• Laser Class: Class 4

• Number of Diodes: 2

• Light Source: 2 X LD + FAC Tech + C-Lens

• Focus Spot： o.13x0.13mm - 0.18xo.18mm,

• focus on 33mm: 0.13 x 0.13 mm,

• focus on 55mm: 0.18 x 0.18mm

• PWM Input: VPP(3.3-12V), Recomend 1KHz,

• Quiet Design: Drive the built-in control ic, judge the working state and adjust the fan work.

• Max Cutting & Carving Depth: 18mm (The data is tested by NEJE users, and it needs to be done under more accurate focusing and adding correct and certain strength of air assist.)

• Brushed Stainless Steel: Yes

• Mirror Stainless Steel: Yes

NEJE Master 2S Plus N40630 Laser Engraving Machine

Feature:

-【420 x 255 mm】Just fit on a desktop with a width of 600mm, and the left side of the machine is not limited by the size of the material. It is suitable for processing large area materials. Under the protection of the MEMS vibration protection sensor, the engraving and cutting processes can be completed at the same time. The X-axis motion module is only 120g and is driven by a 40mm thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure, 3400 x 5600 pixels, engraving accuracy: 0.075 mm dot pitch, 339 dots/inch. The whole machine function test requires only 4 screws to complete the installation.

-【Advanced laser module】 The newly designed N40630 module can cleanly cut 3mm thick plywood in one pass, with a minimum focus point of 0.05x0.05mm, and can engrave metal by covering the layer. Built-in fast intelligent drive, temperature feedback can be timely, and intelligently adjust fan heat dissipation. Safe and quiet to use.

-【More materials, clearer】 Wood, MDF, leather, paper, cotton, etc. are all supported. The cutting edges are very clean. Cover spraying can engrave stainless steel, glass, transparent acrylic and so on.

-【Portable professional control software]】32-bit control system, the fastest speed can reach 200,000mm/min, supports LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS), you can change it by taking photos with your mobile phone or selecting images from the album To complete the work quickly, NEJE provides free software upgrade services.

-【Perfect after-sales service]】The whole machine is guaranteed for free for 2 years (laser module: 2 years and 20,000 hours warranty), and vulnerable parts are shipped worldwide within 24 hours.

NEJE N40630 Laser Module:

• Heatsink Material：Aircraft Aluminum + Brass Shell

• Luminous Color：Blue

• Section Size：40mm x 40mm

• Cooling Mode：Temperature sensor intelligent control + 10000 rpm 40mm cooling fan

• Dimension：60 * 40 * 40mm

• Adapter Plug：5.5 2.1 port

• Can Engrave：MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum

• Can Not Engrave：Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material

• Module Input：20-30W

• Optical power output：5.5W

• Wavelength：445-450nm

• Beam Shape：Dot (Focusable)

• Working Voltage：DC 12V

• TTL&PWM Modulation：YES, Compatible with Both TTL & PWM Modulation

• Input Voltage：DC12V 3A

• PWM/TTL Input：DC3.3V-12V

• Input Interface：PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)

• NOTE：Temperature interface can be disconnected，NEJE provides text instructions for temperature acquisition on the wiki.

• Drive Mode：External ACC

• Safe temperature range：<60 ℃

• Module weight：202g ( The lighter the weight, the smaller the move inertia, the better the performance )

• Life Time：10000-20,000 hours

NEJE Master 2S Plus A40630 Laser Engraving Machine

NEJE A40630 Laser Module:

• This module has a different power than A40640, A40630 is a single LD, and A40640 is a dual LD beam, other capabilities are the same; a square spot can cut up to 20mm thickness

• Control Mode: PWM,TTL

• Optical power: 5.5W

• Wavelength: 450nm

• Available Materials of Engraving: Wood, Paperboard, Acrylic, Metal

• Available Materials of Cutting: Kraft Paper, Paper Board, etc.

NEJE Master 2S Plus A30130 Laser Engraving Machine

Feature:

-【255x440mm】 Just fit on a desktop 600mm wide, and the left side of the machine is not limited by the size of the material. It is suitable for processing large-area materials. Under the protection of the MEMS vibration protection sensor, the engraving and cutting processes can be carried out at the same time. The X-axis motion module weighs only 120 g and is driven by a 40 mm thick high-performance stepper motor, which offers a faster engraving experience than the gantry structure, 3400 x 5600 pixels, engraving accuracy: 0.075 mm dot pitch, 339 dots / inch. The entire machine function test only requires 4 screws to complete the installation.

-【Extended engraving module】 Thanks to optical processing, the A30130 module has a small and large divergence angle, can engrave stainless steel directly and the maximum cutting thickness is 18 mm. Built-in fast intelligent drive, temperature feedback can be timely and intelligently adjust the heat dissipation of the fan. Safe and quiet to use.

-【More materials, clearer】 Wood, MDF, leather, paper, cotton, etc. are supported. The cut edges are very clean. Masking spray can engrave stainless steel, glass, transparent acrylic, etc.

-【Portable professional control software]】 32-bit control system, the fastest speed can reach 200,000mm / min, supports GRBL, Lightburn, APP software (Android, iOS, ipadOS, macOS), you can change it by sharing photos with your make mobile phone or select pictures from album.

-【Perfect after-sales service]】 The entire machine is guaranteed free of charge for 2 years (engraving module: 2 years and 20,000 hours guarantee) and parts at risk are shipped worldwide within 24 hours.

NEJE A30130 Laser Module:

• Mode Control: PWM,TTL

• Optical power: 5.5W

• Wavelength: 450nm

• Module weight: 227G

• Available Materials of Engraving: Wood, Paperboard, Acrylic, Metal

• Available Materials of Cutting: Kraft Paper, Paper Board, etc.

NEJE Master 2S Plus F30130 Laser Engraving Machine

Feature:

-【More materials, clearer】 Wood, MDF, leather, paper, cotton, etc. are supported. The cut edges are very clean. Masking spray can engrave stainless steel, glass, transparent acrylic, etc.

-【Portable professional control software]】 32-bit control system, the fastest speed can reach 200,000mm / min, supports GRBL, Lightburn, APP software (Android, iOS, ipadOS, macOS), you can change it by sharing photos with your make mobile phone or select pictures from album.

-【Perfect after-sales service]】 The entire machine is guaranteed free of charge for 2 years (engraving module: 2 years and 20,000 hours guarantee) and parts at risk are shipped worldwide within 24 hours.

NEJE F30130 Laser Module:

• Designed for oakeroo CNC engraving machine, other CNC Engraver Cutter, 3D printer, arduino and CNC equipment. 3.3-12v TTL adjustable power.

• Wide application, 3 input interface designs, DC12V + TTL, 3pin 2,54-schnittstelle, 3-pin-verbindungsport. 5,5 W optical power output, can directly on the base of Master2 20 W upgraded if it 7 W and 3500 MW, customers need the 12 V 3 A-Power replace adapter.

• Fixed Focus design, you just need a 6-mm-abstandshalter at the bottom mount and tighten the screw, to adjust the focus. The size of 30mm has no influence on the engraving range Master2.

• Intelligent Drive, the the temperature detect and the fan speed dynamic can adjust, making it when not use quiet. Doppelkugel high speed fan with 15000 rev/min, stronger heat dissipation performance.

• 60mm built-in copper core with thread, silicone grease for heat dissipation add, safe temperature control.

Packing List

• Laser engraving machine x1

• Laser Module x1

• Power supply x1

• Manual x1

• Goggles x1

• (Data cable 1, wooden board 1, paper 5, pen 1, brush 1, focusing film 1, angle iron 4, alumina film 1, cable tie 3, nut 5, large hexagon wrench 1, small hexagon wrench 1, Open wrench 1)

Note(Please pay attention)

1. When the machine is running, do not leave without authorization Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin!

2. Do not engrave mirror objects，Pay attention to fire，Pay attention to pets when working！

3. Smoke will be generated when burned, please pay attention to smoke exhaust indoors.

4. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module.

5. If you have any quality problem with the machine, please feel free to contact us. Many operative problems can be solved according to your video and problem description. Thank you in advance.