12Nm Hollow Shaft Magnetic Powder Brake 1.2kg DC24V Unwinding & Manual Tension Controller Kit for Printing Packaging Machine
472.97 409.05 $
SALE
ID: 59661
Quantity
FZ25A-1/FS25A-1 2.5kg Magnetic Powder Brake Single-axis Magnetic Powder Brake
0.0 (1 votes) | 2 orders
Price:
US $527.94
/ piece
Discount Price:
US $
461.51
/ piece
-13%
FZ25A-1 2.5kg Magnetic powder brake single-axis magnetic powder brake
Precautions
Do not overload or cool in place
When the magnetic powder clutch/brake is working, its torque, speed and slip power must not exceed the rated cooling mode (natural cooling, forced air cooling, water cooling) depending on the slip power generated during actual operation. Cooling air requires filtration of Oil and water. Conditional, temperature detection, alarm device can be installed to prevent excessive temperature and affect the service life of magnetic powder. (temperature 80 ° C)
●About life
The service life of the magnetic powder clutch/brake is the life of the magnetic powder. Generally speaking, the magnetic powder has a service life of 4,500-7,500 hours under the condition of no overload; however, its service life can be extended several times In the state of being over, such as: reducing the working torque of the magnetic powder clutch/brake, relative slip speed And the slip power is 50%-70% of the rated value. That is to say, when designing, the margin Is enlarged as much as possible.
About torque
After the magnetic powder clutch/brake is used in the factory, the magnetic powder will wear-in during the early use, and the torque will decrease slightly, which can be compensated by adjusting the current.
Do not overload or cool in place
When the magnetic powder clutch/brake is working, its torque, speed and slip power must not exceed the rated cooling mode (natural cooling, forced air cooling, water cooling) depending on the slip power generated during actual operation. Cooling air requires filtration of Oil and water. Conditional, temperature detection, alarm device can be installed to prevent excessive temperature and affect the service life of magnetic powder. (temperature 80 ° C)
●About life
The service life of the magnetic powder clutch/brake is the life of the magnetic powder. Generally speaking, the magnetic powder has a service life of 4,500-7,500 hours under the condition of no overload; however, its service life can be extended several times In the state of being over, such as: reducing the working torque of the magnetic powder clutch/brake, relative slip speed And the slip power is 50%-70% of the rated value. That is to say, when designing, the margin Is enlarged as much as possible.
About torque
After the magnetic powder clutch/brake is used in the factory, the magnetic powder will wear-in during the early use, and the torque will decrease slightly, which can be compensated by adjusting the current.
Characteristic
1, high-precision torque, torque control range is very wide, and high control accuracy, the transmission of torque and excitation current into the correct ratio, can achieve high-precision control.
2Excellent durability and long service life The super-alloy magnetic powder with high heat resistance, wear resistance, oxidation resistance and corrosion resistance has long service life.
Stable torque characteristics of superior stability The magnetic properties of the magnetic powder are good, and the bonding force between the powder particles is stable, the sliding torque is very stable, and the torque can be kept constant regardless of the relative number of revolutions .
4 Continuous sliding operation uses a cooling structure with excellent heat dissipation effect and uniform heat distortion, and high heat resistance of magnetic powder, allowing for connection and braking power and sliding power, and smooth sliding operation without causing vibration.
5 The connection is smooth and the impact is slightly small when there is no impact connection, and it can be started and stopped smoothly without impact. And the resistance torque is slightly smaller, which will not cause useless heat.
6 Suitable for high-frequency operation in response to agile and fast and special heat dissipation structure, suitable for high-frequency operation.
7 Lightweight, maintenance-free, long-life type, simple and lightweight, using high-temperature coils and special grease bearings, and special treatment for the armature that is easy to wear, prolonging the service life.
Scope of use
Printing machinery, paper machinery, bag making machinery, papermaking machinery, wire and cable machinery, coiling machinery, wire machinery, bale bag machinery, textile machinery, weaving machinery, woodworking machinery, test equipment, simulation load, various mechanical precision tension control, general Industrial equipment, and other general industrial machinery.
1, high-precision torque, torque control range is very wide, and high control accuracy, the transmission of torque and excitation current into the correct ratio, can achieve high-precision control.
2Excellent durability and long service life The super-alloy magnetic powder with high heat resistance, wear resistance, oxidation resistance and corrosion resistance has long service life.
Stable torque characteristics of superior stability The magnetic properties of the magnetic powder are good, and the bonding force between the powder particles is stable, the sliding torque is very stable, and the torque can be kept constant regardless of the relative number of revolutions .
4 Continuous sliding operation uses a cooling structure with excellent heat dissipation effect and uniform heat distortion, and high heat resistance of magnetic powder, allowing for connection and braking power and sliding power, and smooth sliding operation without causing vibration.
5 The connection is smooth and the impact is slightly small when there is no impact connection, and it can be started and stopped smoothly without impact. And the resistance torque is slightly smaller, which will not cause useless heat.
6 Suitable for high-frequency operation in response to agile and fast and special heat dissipation structure, suitable for high-frequency operation.
7 Lightweight, maintenance-free, long-life type, simple and lightweight, using high-temperature coils and special grease bearings, and special treatment for the armature that is easy to wear, prolonging the service life.
Scope of use
Printing machinery, paper machinery, bag making machinery, papermaking machinery, wire and cable machinery, coiling machinery, wire machinery, bale bag machinery, textile machinery, weaving machinery, woodworking machinery, test equipment, simulation load, various mechanical precision tension control, general Industrial equipment, and other general industrial machinery.
Application route
1. Buffer start and stop: The cushioning effect of the smoothing characteristic and the constant torque characteristic at the time of connection is the peak torque with stable acceleration and no impact.
2, continuous sliding, tension control
3, torque limiter
4, high-speed response
5, power absorption
6, positioning stop
7, for analog load
1. Buffer start and stop: The cushioning effect of the smoothing characteristic and the constant torque characteristic at the time of connection is the peak torque with stable acceleration and no impact.
2, continuous sliding, tension control
3, torque limiter
4, high-speed response
5, power absorption
6, positioning stop
7, for analog load
- Voltage: 24V
- Material: Cast Iron
- Model Number: FZ25A-1/FS25A-1
- Origin: Mainland China
- Certification: NONE
SHIPPING AND DELIVERY
We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.
How do you ship packages?
Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.
Do you ship worldwide?
Yes. We provide free shipping to over 200 countries around the world. However, there are some location we are unable to ship to. If you happen to be located in one of those countries we will contact you.
What about customs?
We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.
How long does shipping take?
Shipping time varies by location. These are our estimates:
| Location | *Estimated Shipping Time |
|---|---|
| United States | 10-30 Business days |
| Canada, Europe | 10-30 Business days |
| Australia, New Zealand | 10-30 Business days |
| Central & South America | 15-30 Business days |
Do you provide tracking information?
Yes, you will receive an email once your order ships that contains your tracking information.
My tracking says “no information available at the moment”.
For some shipping companies, it takes 2-5 business days for the tracking information to update on the system.
Will my items be sent in one package?
For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.
If you have any other questions, please contact us and we will do our best to help you out.
REFUNDS & RETURNS POLICY
Order cancellation
All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.
Refunds
Your satisfaction is our #1 priority. Therefore, if you’d like a refund you can request one no matter the reason.
If you did not receive the product within the guaranteed time(45 days not including 2-5 day processing) you can request a refund or a reshipment.
If you received the wrong item you can request a refund or a reshipment.
If you do not want the product you’ve receive you may request a refund but you must return the item at your expense and the item must be unused.
- Your order did not arrive due to factors within your control (i.e. providing the wrong shipping address)
- Your order did not arrive due to exceptional circumstances outside the control of HOGAKI.COM - Home, Garden & Kitchen shop (i.e. not cleared by customs, delayed by a natural disaster).
- Other exceptional circumstances outside the control of hogaki.com
*You can submit refund requests within 15 days after the guaranteed period for delivery (45 days) has expired. You can do it by sending a message on Contact Us page
If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.
Exchanges
If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.
Please do not send your purchase back to us unless we authorise you to do so.
LARGE ORDER DEALS
Thank you for your interest doing business with us!
If you would like to get a discounted price for your large purchase orders, fill in the required blanks along with your email address, the product Item ID # and/or the link of the item that you want to order, item quantity (minimum of 30 pieces), shipping country and payment method is required. We will contact you with a discounted price as soon as we receive your inquiry.
