Miniature Solenoid Valve Solenoid Valve Normally Closed DC 12V Electric Vent Valve For Garden Watering
14.64 12.66 $
Please note that we are selling factory direct products. All our products are 100% brand new in manufacturer's packaging.
1/4" Stainless Steel Body Normally Open 2 Way Solenoid Valve Oil Acid AC220V
Code Option
Thread Option: G and NPT
Standard Voltage Option: DC12V,DC24V,AC110V,AC220V
Material Option: Stainless Steel
Oil Seal Option:VITON
Descriptions | VX2120-08-SS-NO | ||
Port Size | G1/4'' | ||
Orifice Size(mm) | 2 | ||
CV Value | 0.18 | ||
Type | Normal Open | ||
Way Position | 2/2 Way | ||
Material of Body | Stainless Steel | ||
Material of Pin | Stainless Iron | ||
Material of Spring | Stainless Steel 304 | ||
Material of Seal | High Quality NBR and VMG | ||
Motion Pattern | Direct Drive | ||
Working Temperature | -5-100'C Degree | ||
Working Pressure | Water/Air/Gas: 0~0.7Mpa | ||
Voltage | AC110V,AC220V,DC12V,DC24V,AC24V | ||
Voltage Range | ±10% | ||
Liquid | Water Oil Gas Air | ||
Coil | DIN type with Wires |
Description:
Two position, two way, normal close switch, magnetic solenoid water valve.
it is a good choice when the horizontal tube keep upward.
Used to control automatically the liquid and gas in the pipeline.
QA: WHY THE VALVE COULD BE SUCKED BY A MAGNET?
Some people often think that the magnet is used to test the quality of stainless steel. The magnet is not attractive, non-magnetic and genuine; If it is magnetic, it is considered to be a fake. In fact, this is an extremely one-sided, impractical and wrong discrimination method. Generally speaking, stainless steel has magnetic and non-magnetic. Austenite type is non-magnetic or weakly magnetic, such as 201, 202, 304, 316, etc; Martensite or ferrite is magnetic, such as 430, 420, 410, etc. However, due to component segregation or improper heat treatment during smelting, there will be a small amount of martensite or ferrite in Austenitic 304 stainless steel. In this way, 304 stainless steel will have weak magnetism. In addition, after cold working, the microstructure of 304 stainless steel will also be transformed into martensite. The greater the cold working deformation, the more martensite transformation, and the greater the magnetism. Like the stainless steel wire of the same batch number, it is made into a straight support without obvious magnetic induction, but when it is bent into a rectangle or circle, it will produce some magnetism due to large cold bending deformation, especially in the corner part. In order to eliminate the magnetism of the above 304 stainless steel, the stable austenite structure can be restored by high temperature treatment, so as to eliminate the magnetism. In particular, the magnetism of 304 stainless steel caused by the above reasons is not at the same level as that of other stainless steels, such as 430 and carbon steel, that is, the magnetism of 304 stainless steel is always weak.
IF u need Coil and Fittings for this valve,pls click follow picture
IF u need Normally Closed type VX2120-08-SS-NC,pls click here
IF u need Chucks,pls click here
If u need extra O-ring for VX2120-08-SS-NO,pls click follow picture
IF u need SUS304 Needle Valve,pls check follow link,
If u need Stainless Steel Tube,pls check follow link,
General purpose 2way direct acting and semidirect lift acting valves.
Common applications include water, oil (below 20cst), air, gas, freon, *vacuum, weak acids & alkali.
Available in a body/seal material of brass/NBR or stainless steel/viton.
The coil has an adapter with screw terminals for wire leads.
Simple connect wires to the adapter and plug right into the coil for operation.
Adapters can be removed from the coil for maintenance with no need to detach wires.
Brass/NBR valves are suitable for water, hot water, gas, air, non-corrosive oils and freon.
Stainless Steel/Viton valves are suitable for hot water, acid, alkali, chemical salt, oils and hydrocarbon.
Direct Acting: These valves close or open completely on their own.
This means that they can block the flow of fluid in both directions.
SemiDirect Acting: These valves can only stop flow in one direction.
There is an arrow located on the valve body showing the direction of flow in which it blocks.
In order to prevent backflow when the valve is closed, a check valve must be installed.
We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.
Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.
Yes. We provide free shipping to over 200 countries around the world. However, there are some location we are unable to ship to. If you happen to be located in one of those countries we will contact you.
We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.
Shipping time varies by location. These are our estimates:
Location | *Estimated Shipping Time |
---|---|
United States | 10-30 Business days |
Canada, Europe | 10-30 Business days |
Australia, New Zealand | 10-30 Business days |
Central & South America | 15-30 Business days |
Yes, you will receive an email once your order ships that contains your tracking information.
For some shipping companies, it takes 2-5 business days for the tracking information to update on the system.
For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.
If you have any other questions, please contact us and we will do our best to help you out.
All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.
Your satisfaction is our #1 priority. Therefore, if you’d like a refund you can request one no matter the reason.
If you did not receive the product within the guaranteed time(45 days not including 2-5 day processing) you can request a refund or a reshipment.
If you received the wrong item you can request a refund or a reshipment.
If you do not want the product you’ve receive you may request a refund but you must return the item at your expense and the item must be unused.
*You can submit refund requests within 15 days after the guaranteed period for delivery (45 days) has expired. You can do it by sending a message on Contact Us page
If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.
If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.
Please do not send your purchase back to us unless we authorise you to do so.
Thank you for your interest doing business with us!
If you would like to get a discounted price for your large purchase orders, fill in the required blanks along with your email address, the product Item ID # and/or the link of the item that you want to order, item quantity (minimum of 30 pieces), shipping country and payment method is required. We will contact you with a discounted price as soon as we receive your inquiry.© 2017-2023 HOGAKI.COM - Home, Garden & Kitchen shop.