FACIIO 1PC 35mm/40mm Watersaving Replacement Ceramic Spool Water Mixer Tap Faucet Cartridge Kitchen Bathroom Faucet Replace Part

• I can't judge myself?

• Send a picture to customer service

• Did not find the same specifications?

• Send a picture to customer service

• Will not disassemble the valve plug?

• Send a picture to customer service

• More spool

• Contact Customer Service

​Disassembly instructions

• Step 1: Remove the hot and cold logo on the faucet

• Step 2: Use a screwdriver to remove the screws inside the removed hot and cold logo

• Step 3: Remove the trim cover and remove the cap with a wrench

• Step 4: Remove the cartridge

• 1. How to see the bottom of the spool

• Measuring the diameter of the bottom of the valve core (usually 35, 40mm is commonly used) to measure the center distance of the fixed foot

• 2. Recommend to buy two, why buy two

• Because even if the diameter of the bottom of the spool is the same, the shape is similar, it will still cause water leakage. Buy two to better explain this.

• 3. Why did I buy 2 leaks?

• If both of them leak water, it may be related to the thickness of the sealing ring. The internal structure of the valve core is not the same. It is necessary to know that the valve core is various and the appearance can not be seen. It is impossible to guarantee 100% matching!These are not the quality issues of our products, I hope you can understand.If you disagree with the above points, don't shoot!

• Every household has a faucet. The faucet will be more or less problematic for a long time, and most of the problems are on the valve core, which makes the faucet useless. It is a pity to throw it. What should I do? Good way to replace it. Spool.

• Q: Are the spools universal?

• A: Most of the hot and cold water faucet spools are divided into 35 and 40 specifications. 35 and 40 represent the diameter of the spool, that is, 35mm, 40, mm. If you can't determine the faucet spool specifications, both the 35 and 40 specifications are purchased. If the faucet at home is ok, you can purchase it first, in case you need it.

• Q: Is the copper spool good or the ceramic spool good?

• A: Most of the hot and cold water taps on the market are single handles, that is, one handle control, and all single hot and cold water taps are ceramic valve cores, and there is no copper valve core. The ceramic piece referred to by the ceramic valve spool refers to the friction plate inside the valve core. It does not mean that the entire valve core is made of ceramic. The ceramic valve body is usually made of ABS plastic.

• Common hot and cold water faucet spools have steel ball spools and ceramic spools

• Compared with the steel ball valve core, the ceramic valve core is more heat-resistant and wear-resistant. At the same time, the ceramic valve itself has good sealing performance, so that it can achieve a high number of opening resistances, and no faucet leakage due to valve core wear. .

• Since the spool is inside the faucet, the spool cannot be seen when you purchase it, but you can judge whether the spool is good or bad depending on the feel when you turn the handle. In general, turning the handle, if the hand feels comfortable, smooth, light, no block, and open and close quickly indicates that the spool is better.