QUICK TR1300A Hot Air Station 1300W Intelligent Soldering Station for Mobile Phone Motherboard Repair Digital Welding Station
963.36 $
Product Features
1. Input voltage: 100-240V
2. Power: 0-75W
3. Product Size: 133 * 88 * 38MM
4. Auto sleep: handle for 10 minutes, T12 host into the sleep state, keep the temperature 200 ℃
5. Cancel the sleep: pick up the handle or light handle automatically cancel the sleep, the host heated to the original set temperature
6. Standby mode: handle for 20 minutes, T12 host into standby mode, the host to stop heating, automatic to 0 ℃, keep the room temperature state
7. Cancel standby: adjust the temperature knob arbitrarily, T12 cancel standby mode, automatically heat to the original set temperature
8 Packing list: Host X1 ( aluminum alloy shell)
Power cord X1
T12-K X1
Handle X1
Normal Heating Mode
Turn on the meachin enter "Normal Heating Mode" Left-handed encoder get lower temperature, trun to right get higher temperature, temperature range 200-450 degrees (with Temperature enhancement, highest temperature can up to 480 degrees). No operation for a while will enter "Sleep mode'temperature is 200 degrees Single digit decimal point display as the direction of "Sleep mode', shaking the handel(hundred decimal light) or Turn the encoder out of sleep mode.
If you don't operate anything during the "Sleep mode', it will enter "turn off" digital display 000. Turn the encoder get off "turn off" will heating normally. If wake up mode is 0 you can shake the handel get off "turn off"
Support hot swap, remove the tip after the digital tube display 500.
press encode 0.1-0.3 second during heating enter enhancement, (Ten decimal flashing) press the second time get normal.
0.3-0.8second enter "Sleep mode'( Single digit flashing) press it again or shake the handel back to "Normal Heating Mode"
Parameter settings:
Press encoder 0.8-2.5 second enter "parameter settings" There are 12 menus totally.P00,P01,P02,P03,P04,P05,P06,P07,P08,P09,P10,P11. Each menus shows 1.5 seconds,then show the corresponding parameter. during this time Left turn Reduced,right turn increased,press encode save the setting autmactically and show the next menu about 1.5 seconds,then show the corresponding parameter. and so on When the parameter is set for a while, return to normal heating mode.
Menus:
P00: Restore the default parameter (parameter P00 to 1 is to restore the default function, but if transferred to 2 and above then press the encoder will enter the menu (P02 and above); in any menu you can press the encoder more than 2.5 seconds to return to the menu P00;) you can press the encode one by one to set the parameter or you can choose the Specific menu jump betewen the menus,don't need to get off parameter set and re-enter
P01: op amp gain (200-350 times, step 1, default 230.)
P02: Operational amplifier offset voltage (0-250mV, step 2, default value of 100, it means keep the soldering iron head in room temperature operate amplifier voltage according to my measurement this voltage varies greatly with temperature, different magnification different voltage , if you do not how to measure it, please keep the default value)
P03: Thermocouple ℃/mV date (30-50,Step 1,default value is 40, it means how many degrees Thermocouple need to increase to let the voltage increase 1mV. please keep the default value
p04:Adjust temperature step (you can choose 0,1,2,5,10 degrees, 0 is locked the soldering iron temperature
P05: Sleeping time (long time no operate enter Sleeping,0-60min, 0 means Forbid Sleep
P06:Shut down time (0-180min,0-30 step 1, 30-180 step 10, 0 means Forbid Shut down )
P07: internal temperature correction (please keep the default 0, prohibit user settings)
P08: wake up mode (0,1, 0 means in the shutdown mode can be rotated the encoder or shake the handle to wake up, 1 only rotate the encoder wake up (Note: press the encoder can not wake up, can only rotate) )
P09: Increase temperature degree (20-100 degrees, the default value is 30 degrees not higher than the maximum temperature of 480 degrees) (normal heating state press the encoder 0.1-0.3 seconds enter the strengthen temperature , for a short time welding large solder joints)
P10: temperature enhancement time (default 10-250 seconds, default 30 seconds)
P11: automatically save the parameters and return to the heating mode effective time (4-60 seconds, the default 10 seconds)
- is_customized: Yes
- Model Number: STC-T12-Aluminum shell
- Brand Name: NoEnName_Null
SHIPPING AND DELIVERY
We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.
How do you ship packages?
Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.
Do you ship worldwide?
Yes. We provide free shipping to over 200 countries around the world. However, there are some location we are unable to ship to. If you happen to be located in one of those countries we will contact you.
What about customs?
We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.
How long does shipping take?
Shipping time varies by location. These are our estimates:
| Location | *Estimated Shipping Time |
|---|---|
| United States | 10-30 Business days |
| Canada, Europe | 10-30 Business days |
| Australia, New Zealand | 10-30 Business days |
| Central & South America | 15-30 Business days |
Do you provide tracking information?
Yes, you will receive an email once your order ships that contains your tracking information.
My tracking says “no information available at the moment”.
For some shipping companies, it takes 2-5 business days for the tracking information to update on the system.
Will my items be sent in one package?
For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.
If you have any other questions, please contact us and we will do our best to help you out.
REFUNDS & RETURNS POLICY
Order cancellation
All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.
Refunds
Your satisfaction is our #1 priority. Therefore, if you’d like a refund you can request one no matter the reason.
If you did not receive the product within the guaranteed time(45 days not including 2-5 day processing) you can request a refund or a reshipment.
If you received the wrong item you can request a refund or a reshipment.
If you do not want the product you’ve receive you may request a refund but you must return the item at your expense and the item must be unused.
- Your order did not arrive due to factors within your control (i.e. providing the wrong shipping address)
- Your order did not arrive due to exceptional circumstances outside the control of HOGAKI.COM - Home, Garden & Kitchen shop (i.e. not cleared by customs, delayed by a natural disaster).
- Other exceptional circumstances outside the control of hogaki.com
*You can submit refund requests within 15 days after the guaranteed period for delivery (45 days) has expired. You can do it by sending a message on Contact Us page
If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.
Exchanges
If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.
Please do not send your purchase back to us unless we authorise you to do so.
LARGE ORDER DEALS
Thank you for your interest doing business with us!
If you would like to get a discounted price for your large purchase orders, fill in the required blanks along with your email address, the product Item ID # and/or the link of the item that you want to order, item quantity (minimum of 30 pieces), shipping country and payment method is required. We will contact you with a discounted price as soon as we receive your inquiry.
