220V Electric Engraving Carving Pen Plotter Machine For Chiseling Tips On Metal Wooden Glass Plastic Ceramics Stone Surface

220V Electric Engraving Carving Pen Plotter Machine For Chiseling Tips On Metal Wooden Glass Plastic Ceramics Stone Surface

Bullet Points:

1、The electric carving pen is equipped with five-speed control and body-type handle to make the carving process smoother.
2、It has the characteristics of small volume, light weight, easy writing, fast speed, easy carrying and easy use.
3、It is very popular with consumers. The instrument provides a quick and easy way to retain marks on materials.
4、It can engrave any permanent patterns and characters, with a large concave depth, which can reach up to 1mm according to the material hardness.
5、It is widely used for carving on the surface of almost all materials such as metal, jade, glass, plastic, marble, wooden, etc.

Principle of electric carving pen:
The forced vibration ( up and down vibration ) generated by the periodic characteristic of alternating current frequency drives the pen head to work. Therefore, an acceptable volume will be generated during the working process. ( carving pens based on this principle have volume )

Use method of electric carving pen:
When in use, hold the machine body with your hand, tilt it slightly at an angle ( about 45 degrees ) like holding a pen to write, and put your hand on the table top. Do not press down hard when carving, which is slightly slower than normal writing speed. Move the carving on the object. There is a mark on the place where you pass. According to different materials, adjust the gear position reasonably. Through repeated writing, its performance can be mastered to meet the font size and depth requirements of different materials.

Note:
Continuous operation should not exceed 20 minutes, so as not to damage the coil, intermittent use can ensure the life of the body, the casing should be used after cooling when heating, please turn off the power supply when not in use!

Specifications:
Power supply: AC220V, 50Hz
Power: 25W
Plug: European standard round plug
Sharp and thick: about 0.1mm/ 0.004 in
Power cord length: about 1.2m/ 47.24 in
Scope of application: sculpture
Size(about): 170× 46× 55 mm/ 6.69 * 2.52 * 2.17 in
Weight: about 260g

Package List:

1* Electric carving pen

Payment methods:

· You may make the payment via any of the methods above and pls settle within 3 days once your order is placed.

· Your payment will be verified by Hogaki within 24h and we will process your order once that's finished.

· If your order is closed owing to security reasons, you will need to submit a claim to Hogaki.

· The refund caused by order cancellation, refund agreement or mediation will be processed instantly and usually takes about 7-10 working days to reach your account.

Shipping and package:

· All items will be checked and well packed before shipping. Orders will be dispatched within 2-5 working days after the payment is finished.

· The weight of parcel via normal post is limited to 2kg. We will send separately if the weight is over 2kg.

· Usually it takes about 15 - 60 days and might be a little longer to some remote area.

· You may choose fast shipping method if you wanna get the parcel sooner, and for this you will need to pay the shipping fee.

Resend and refund:

We will resend or refund if the parcel gets lost, damaged during transit or receive

the wrong item. Please feel free to contact us and we will be pleased to help you.

Feedback:

·  If you are satisfied with our product and service, please leave us a positive feedback, we will be very appreciated.

· If there is something wrong, please contact us first before you leave the feedback and we will try our best to help you until everything is fine.