2000W Thyristor Electronic Dimmer 220V Silicon Controlled Rectifier SCR Voltage Regulator Speed Control Temperature Thermostat
13.81 12.01 $
Specification
Product Name:PIR Infrared Motion Sensor (Not adjustable)
Type: PIR Switch
Power supply: AC 110~250v 50~60Hz
Load power: 5W~200W
Sensor distance: 5~8m
Dimension: Approx 25*35mm
Color: White
Feature:Easy to install and simple to use
Product Name: Adjustable PIR Infrared Sensor(Adjustable)
Mode: Button Adjustable Mode
Power supply: AC 110~250v 50~60Hz
Load power: 5W~200W
Sensor distance: 5~8m
Size: 45×40×25mm
Color: White
Feature
1.Adjust the light soft and stable, no flickering.
2.You can conveniently to let the light auto on/off .The switch can detect human body's infrared , and use infrared to control the load.
3.Users according to actual needs, the human body sensors installed in the appropriate environment.
4.Easy to install and simple to use.
Product Name: Adjustable PIR human body infrared sensor (adjustable angle and mode)
Angle: Adjustable
Mode: Button Adjustable Mode
Detection range: 160°
Detection distance: 6-8M (25°)
Ambient lighting: 2-2000 LUX (adjustable)
Material: ABS
Installation method: open type (opening 10mm 12mm)
Working voltage: AC85-265V
Delay time: 8 seconds - 6 minutes (adjustable)
Working temperature: -10 ° C -40 ° C
Installation height: 1.8M-2.5M
Dimensions: 41*39*20mm
Dimensions after opening: 10mm
Color: black, white
Feature
1) Small size and high sensitivity
2) 160° survey range
3) The handle can be rotated up and down by 180°
4) Fresnel lens, efficient refraction
5) Perspective flame retardant casing and impact resistance
6) Small opening for easy installation
7) Human body induction uses pyroelectric infrared technology, built-in human body infrared sensor module, light effect sensor module, delay switch module. It adopts industrial zone-level chips and has a large load capacity.
8) When the person enters the sensing range, it can be automatically turned on. After the person leaves, the automatic delay can be turned off to prevent the conventional lighting from being opened. The unmanned one thinks that the waste is used to extend the service life of the lamp, and integrates energy saving, convenience and environmental protection.
9) The day and night can be automatically recognized, and the ambient illumination of the starting work can be freely selected.
10) The detection distance is adjustable and can be adjusted according to the place of use.
11) The light-on time is adjus
Product Name: Microwave (radar) Sensor Switch
Installation: Wall Mount
color: White
Input voltage: 220V
Installation height: 3.5M recommended
Output power: ≤ 500W
Sensing distance: 1-10 meters adjustable
Size: 100×40 mm
Precautions
1) Turn off the power before carrying out any disassembly operation on the sensor and operate it by a professional electrician.
2) The installation and use of sensors through supply voltage must strictly comply with the appropriate national safety circuit regulations and power requirements.
3) The switch cannot be shielded by the all-metal sensor window; you must ensure that the sensor window does not have a metal body.
4) In case of any special circumstances or use in a special environment, when the sensor is out of control, please reduce the sensing distance slightly when sensing the distance.
Installation Steps
1.USe chassis to find the installation place.The use pen to point screw hole position and drill two screw holes.
2.Put in expansion pipe, connect line and use screw to fix.
3.Cover dome by clockwise. Please pay attention that the indicator light position must be in alignment with the light hole on the dome.The check if fastener is buckled tightly.
4.Installation is finished.
Settings
1. Distance (sensitivity) setting
Sensing Detection Sensitivity Between 10%, 30%, 50%, 75%, and 100% of stalls, adjust method:
Refer to the dialing icon on the sticker, and dial the code bar in the direction of the arrow to dial the code combination corresponding to the desired sensing range.
The maximum sensing distance in front of the sensor is 8 meters.
2. Time setting
The sensor output delay time can be adjusted between “6 seconds, 30 seconds, 180 seconds, 300 seconds, 15 minutes, 30 minutes”. Adjustment method: refer to the dialing icon on the sticker and press the arrow to dial Dynamic code dial, Bo's required delay time corresponding code combination.
3. Photosensitive settings
The sensitive paper that the sensor works on can be adjusted between 2Lux, 5Lux, 20Lux, 30Lux, and Disable. Adjustment method: refer to the dialing icon on the sticker, and dial the dial lever in the direction of the arrow to set the desired light level. Corresponding code combination.
We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.
Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.
Yes. We provide free shipping to over 200 countries around the world. However, there are some location we are unable to ship to. If you happen to be located in one of those countries we will contact you.
We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.
Shipping time varies by location. These are our estimates:
Location | *Estimated Shipping Time |
---|---|
United States | 10-30 Business days |
Canada, Europe | 10-30 Business days |
Australia, New Zealand | 10-30 Business days |
Central & South America | 15-30 Business days |
Yes, you will receive an email once your order ships that contains your tracking information.
For some shipping companies, it takes 2-5 business days for the tracking information to update on the system.
For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.
If you have any other questions, please contact us and we will do our best to help you out.
All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.
Your satisfaction is our #1 priority. Therefore, if you’d like a refund you can request one no matter the reason.
If you did not receive the product within the guaranteed time(45 days not including 2-5 day processing) you can request a refund or a reshipment.
If you received the wrong item you can request a refund or a reshipment.
If you do not want the product you’ve receive you may request a refund but you must return the item at your expense and the item must be unused.
*You can submit refund requests within 15 days after the guaranteed period for delivery (45 days) has expired. You can do it by sending a message on Contact Us page
If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.
If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.
Please do not send your purchase back to us unless we authorise you to do so.
Thank you for your interest doing business with us!
If you would like to get a discounted price for your large purchase orders, fill in the required blanks along with your email address, the product Item ID # and/or the link of the item that you want to order, item quantity (minimum of 30 pieces), shipping country and payment method is required. We will contact you with a discounted price as soon as we receive your inquiry.© 2017-2023 HOGAKI.COM - Home, Garden & Kitchen shop.