5 inch LCD H.265 screen Onvif 3D CCTV IP PTZ joystick controller keyboard with HDMI USB for IP PTZ camera Security
486.70 355.66 $
ID: 14927
Quantity
CCTV Zoom Camera Module Block Decoding Control Board RS485 Pelco Protocol Decode PCB w/ BNC OSD Menu Button 9Pin Ribbon Cable
0.0 ( votes) | 1 orders
Price:
US $
19.71 -
21.47
/ piece
CCTV Zoom Camera Module Block RS485 Decoding Control Board
Description:
1. This rear control decoding board is applied to load the OSD menu of our designated zoom camera modules, operate zoom in/out via control buttons and provide RS485 connection to other devices like DVR, pan/tilt scanner and keyboard controller.The control board is mainly for working with our respective regular analog, AHD and HDCVI zoom camera modules (NOT with default PTZ camera use Sony VISCA protocol firmware). Though it is a general use decoding board for some of our zoom camera modules, we DON'T guarantee that it can work with other zoom camera modules out of our store because of different factory default programs or commands, for example, Sony FCB and HITACHI VK series block cameras (with video out but no OSD/zoom control). We don't suggest you place order if you expect the decoding board to fully support your existing zoom camera module.
2. We can provide price only USD6.00 if you buy this decoding board together with our zoom camera module. Please leave message in order for us to revise the total cost before you complete payment.
3. There are Type 1, Type 4 and Type 5 decoding boards optional. Each only works with some of our zoom camera modules with camera firmware changed to match decoding board (Default Sony VISCA protocol camera firmware is only for PTZ camera use). If you order decoding board and zoom camera module in the same order, we will provide you the related decoding board according to the selected camera module (Camera program will be changed to Pelco protocol firmware to match decoding board). Without designation, we will send default Type 1 board.
4. For working with our 10x mini zoom camera module, the provided Type 4 board supports buttons and wire control, butNOT supports RS485 control.
Features:
1. Zoom camera module decoding board (Only work with camera modules with firmware changed in factory. The board doesn't support default VISCA protocol camera firmware which is for PTZ camera use.)
2. 5-button control for TELE/WIDE, NEAR/FAR and OSD menu
3. RS485 port for remote zoom/focus/OSD operation
4. DC 12V +/- power input
5. BNC video output
6. Red LED indicator
7. PCB size (not including connector and buttons): 50x43.5mm (Type 1), 50x50mm (Type 4). 9-pin ribbon cable >/=70mm
8. Specialized for Excelax/Novoxy AHD/CVI/TVI/CVBS zoom camera modules
Remarks:
1. The decoding board only works with our camera modules with program changed to Pelco protocol firmware in factory. It doesn't directly support the default zoom camera modules (sold separately in store) with default VISCA protocol firmware which is for PTZ camera use only. Please consult us if you need furture support on this issue.
2. The product pictures are for demonstration purpose only, subject to change without prior notification.
3. We can provide price only USD6.00 if you buy this decoding board together with our zoom camera module. Please leave message in order for us to revise the total cost before you complete payment.
4. The default decoding board comes with a short 9-pin ribbon cable, which is applied for connecting the board with zoom camera module only, not for connecting zoom camera module with speed dome camera housing. The pins' sequence of this short 9-pin ribbon cable is different from the sequence of the long 9-pin ribbon cable for connecting camera module and speed dome camera housing.
5. The PCB board color (blue/green) will be subject to stock availability and production lots.
6. Please leave message in order if you need us to provide 2pcs 6mm copper support and fixing screws for jointing decoding board and zoom camera module. You can also use your existing accessories to mount the decoding board to the back of your zoom camera module.
7. If you need decoding board for Sony block camera (FCB-EX480/EX980/EX1020/...), please refer to our store.
Package Content:
1* Decoding Board (Default Type 5. Please leave message for Type 4. For 10x camera module, Type 4 board supports button and wire control only, NOT RS485.)
1* Connection Cable
Very Important Notice:
1. Type 1/5 and Type 4 decoding boards are based on different design and suitable for different zoom camera modules. The 3 boards can't replace each other on the same camera.
2. The decoding board only works with our camera modules with default VISCA protocol firmware changed to Pelco protocol firmware in factory. It doesn't directly support the default zoom camera modules (sold separately in store) with default Sony VISCA protocol firmware which is for PTZ camera use. Please consult us if you need future support on this issue.
Decoding Board Type 1
(Default, Work with our SK-RT/ART/CRT series and some SK-ZM zoom camera modules)
****************************************************************************************************************************************************
Decoding Board Type 4
(Type 2 and Type 3 are discontinued)
(Work with some of our SK-ZM series zoom camera modules)
****************************************************************************************************************************************************
Decoding Board Type 5
Notice: If you use this decoding board to work with our AHD or CVI zoom camera module, you need AHD or CVI supported DVR to connect to the decoding board, then output from DVR to monitor. You can't get video by direct connection between camera/decoding board and monitor.
Above picture was provided by one of our customers located in South Korea. Our 1000TVL analog zoom camera module and decoding board were installed on a drone.
Remarks:
If you need control board for Sony FCB-EX and FCB-CX series CCD block cameras (e.g. FCB-EX(CX)480/490/980/985/995/1000/1010/1011/1020/2200/2400/2700/etc.), please refer to below.
- Model Number: DB-SJZM-CVBS-RS485
- Brand Name: SankiView
- Origin: Mainland China
- Smart home platform: NONE
- Certification: NONE
- Application: Designated Zoom Camera Modules
- OSD Load: Yes
- BNC Out: Yes
- Power Input: DC 12V
- RS485 +/-: Yes
- Zoom Control: Yes
- Focus Control: Yes
- Cable: 9-pin/7-pin
- LED Indicator: Yes
SHIPPING AND DELIVERY
We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.
How do you ship packages?
Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.
Do you ship worldwide?
Yes. We provide free shipping to over 200 countries around the world. However, there are some location we are unable to ship to. If you happen to be located in one of those countries we will contact you.
What about customs?
We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.
How long does shipping take?
Shipping time varies by location. These are our estimates:
| Location | *Estimated Shipping Time |
|---|---|
| United States | 10-30 Business days |
| Canada, Europe | 10-30 Business days |
| Australia, New Zealand | 10-30 Business days |
| Central & South America | 15-30 Business days |
Do you provide tracking information?
Yes, you will receive an email once your order ships that contains your tracking information.
My tracking says “no information available at the moment”.
For some shipping companies, it takes 2-5 business days for the tracking information to update on the system.
Will my items be sent in one package?
For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.
If you have any other questions, please contact us and we will do our best to help you out.
REFUNDS & RETURNS POLICY
Order cancellation
All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.
Refunds
Your satisfaction is our #1 priority. Therefore, if you’d like a refund you can request one no matter the reason.
If you did not receive the product within the guaranteed time(45 days not including 2-5 day processing) you can request a refund or a reshipment.
If you received the wrong item you can request a refund or a reshipment.
If you do not want the product you’ve receive you may request a refund but you must return the item at your expense and the item must be unused.
- Your order did not arrive due to factors within your control (i.e. providing the wrong shipping address)
- Your order did not arrive due to exceptional circumstances outside the control of HOGAKI.COM - Home, Garden & Kitchen shop (i.e. not cleared by customs, delayed by a natural disaster).
- Other exceptional circumstances outside the control of hogaki.com
*You can submit refund requests within 15 days after the guaranteed period for delivery (45 days) has expired. You can do it by sending a message on Contact Us page
If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.
Exchanges
If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.
Please do not send your purchase back to us unless we authorise you to do so.
LARGE ORDER DEALS
Thank you for your interest doing business with us!
If you would like to get a discounted price for your large purchase orders, fill in the required blanks along with your email address, the product Item ID # and/or the link of the item that you want to order, item quantity (minimum of 30 pieces), shipping country and payment method is required. We will contact you with a discounted price as soon as we receive your inquiry.
