G-Penny 1.5kw ER11 65x204mm 220v Air Cooled Spindle 4 pcs Bearings & 1.5kw Inverter & 65mm bracket / holder

1 & 220vAC 1.5kw ER11 Air Cooled Spindle Motor 65mm 4 bearings

1 & 220v 1.5KW QL Inverter / VFD

1 & 65mm spindle bracket

• Size:65 x 204mm ( Body diameter:65mm;  Length:204mm)

• Speed Ways:Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.

• Cooling:Air cooling

• Power Interface:Optional H17-4 pins waterproof air plug. The air plug marked "1 ","2"," 3"," 4", "1 ","2 ","3" were connected to inverter (U, V, W), 4 connected inverter ground.(Pay attention! our spindle "4" connecting to GND,promised personal safety!!)

• Power:1.5kw (1HP=0.735kw)

• Voltage:220vAC(If you need 110v/380v spindle ,please leave message to us,thank you)

• Current:6A

• Frequency:0-400Hz        

• Speed:0-24000rpm

• Runout Off:0.01mm

• Bearing Type:2X7002C P4 DT and 2X7002C P4 DT

• Full sealed angular contact bearings

• Collet:ER11

• Clip Knifediameter: 7mm,6.35mm,6mm,5mm,4mm,3.175mm,3mm,2mm,1mm

• Air Cooling ER11 collet chunk

• Grease Lubrication

• Main Application: Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal, also can engrave on gold,silver,copper, aluminium,Pb etc soft metal surface working.(Please pay more attention, this is wood working spindle, only can used for wood working and aluminum working,please don't use it for steel. If you need steel working,please check the metal spindle,thank you!)

P4 fully sealed angular contact bearings ,2×7002 P4 DT &2×7002 P4 DT,increase spindle life .

Longer length make the torque bigger,more powerful. 

Carefull assembly make the spindle more precisional. 

Precision 0.01mm.Coaxial degree less than 0.0025mm 

Shipment within 4 days,promise the delivery time. 

We are the spindle manufacturer,we offer only best quality and best price to you. 

Pay attention: The spindle size is 65 x 204mm mm, bigger torque. 

The voice of the spindle is very low,almost no vibration. 

Bearing is P4 grade,2×7002C P4 DT &2×7002C P4 DT,increase spindle life.
Low vibration, low noise and high torque.
High precision,runout  off less than 0.01mm.Coaxial degree less than 0.0025mm
Shipment within four days,there is no fake tracking number,make sure that you receive time.
We are the spindle manufacturer,we offer only best quality and best price to you.

Power: 1.5kw

Input Voltage: 220v (±20%)

Input Phase: 1 or 3 phase

Input Frequency: 50-60Hz (±5Hz)

Output Voltage: 220v

Output Phase: 3 phase

Output Current: 7A

Output Frequency: 0-1000Hz

Control Method: V/F control; Open-loop flux vector control

◆Two speed control modes: no PG vector control (SVC), V/F control

◆ No PG vector control (SVC): starting torque 0.5Hz up to 150%

◆ 8-stage simple PLC function, multi-speed control and PID control

◆ Support multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting

◆ I/O terminals can be freely programmed to combine multiple working modes according to user needs.

◆ With jump frequency control function, it can effectively suppress mechanical resonance and make the system more stable and reliable.

◆ With instantaneous power-down retention function, it can avoid the impact of production due to instantaneous power failure

◆ With over torque and under torque detection

◆ Automatic voltage adjustment function to effectively solve the low frequency oscillation problem of high power motor

◆ Provide a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal real-time monitoring and protection to ensure safe operation

◆ Built-in reactor with inverter above 37kW, which improves the power factor of the input side and improves the efficiency and stability of the whole machine.

◆ 0.75~15kW built-in braking unit.

DO NOT set up the inverter by yourself if you don't know how to, or it will make both the spindle and inverter burn easily.
Please contact us, we have manuals, videos and pictures to help you.

Basic parameters

Diameter: 65mm

Material: Cast Aluminium

Features

Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
Inner wall is very smooth, outer walls is sandblasted, relatively fine uniform, but not very smooth.

Cast aluminium fixture is much heavier than aluminium profile fixture.

Product Description

Cast aluminium fixture is high quality aluminium which is casting with a special manufacturing process ,compared with ordinary aluminium ,This product has toughness, strong shock resistance, high hardness and strong antioxidant activity.

Usage

Cast aluminium fixture is mainly used for fixation of ancillary products, thereby ensuring the verticality of balancing and ancillary products, ancillary products to improve running accuracy, reduce noise, reduce the accumulated error.

• Spindle working environment temperature is usually -10 ~ 40 .

• Before installing the first electric spindle axis head turned by hand, should feel flexible, non-blocking phenomenon.

• Spindle in the preservation and transportation, high-speed grease inside the bearing state will change, customers should be running at low speed for 30 minutes. 3000 rpm and then follow the poor increase, run 20 minutes each. Spindle and the inverter should be working together. The inverter's specifications and parameter settings need match spindles parameter.(Because of high-speed grease inside the bearing state will change,when you get the spindle, maybe the noise sounds not normal.Please run it 30 minutes or even more, the noise will be normal.)

• Connect the inverter spindle, three-phase inverter power cord should be soldered in the plug 1 (U), 2 (V), 3 (W) feet, 4 feet for the ground. After the power is turned on, to observe whether the spindle rotation axis indicates the direction consistent. If inconsistency should be immediately shut down, replace the inverter and spindle connected two wires of three-phase power supply.

• During normal operation, air-cooled spindle often encounter the phenomenon of heat, always check whether the air-cooled spindle housing and duct clogging dust.If clogging dust, to promptly clean up. If you do not clean up, it is easily to make the spindle burned.

• Every day before using the spindle must be running at low speed for 15-20 minutes. Clamping the cutters to spindle, collet nuts ,collets,cutters must be clean enough. Shank inserted into the collet must be greater than 15mm.

Before shipping , we did the oil seal to avoid the rust during the long shipment. When you get the spindle, please clearing the oil seal before using. Thank you.

• 1. Cooling in different ways: water-cooled spindle motor is the use of the water cycle to cool the heat generated after the high-speed rotating spindle, spindle motor with fan-cooled approach to cooling.

• 2. Noise: Water-cooled spindle motor is basically no noise, but the air-cooled spindle motor is very loud.

• 3. Life aspects: Water-cooled spindle motor pay attention to maintenance, frequently changes the water or the use of industrial water coolers, air-cooled spindle fan mainly by the wind blowing the heat transferred to the heat sink, so as to achieve the cooling effect.

• 4.If you need use for metal ,hard wood,granite,stone,you can choose metal spindle.Metal spindle much better than wood spindle.

Spindle from the production - assembly - test, and finally the perfect packaging .